2013/3/19 update
学術論文
pdfファイルは実際の印刷物とは内容が異なる場合があります.参考資料とお考え下さい.
投稿中 Submitted
- Yoshihiro MASUDA,Masatoshi KUBOUCHI,Tetsuya SAKAI and Saiko AOKI;
“Degradation behavior of amine cured epoxy resin used for the concrete lining under sulfuric acid environment”,
Cement and Concrete Research
掲載決定 In printing
- Y.ARAO,M.KUBOUCHI, J.TANKS, A.ITO, A.HOSOI, H.KAWADA;
“Direct exfoliation of layered materials in low-boiling point solvents using weak acid salts”,
Carbon, accepted(2018)pp.**-**
- Hadi REZGHI-MALEKI,Mohsen HAMEDI,Masatoshi KUBOUCHI,Yoshihiko ARAO;
“Experimental study on drilling of jute fiber reinforced polymer composites”,
J. Composite Materials,accepted (SAGGE Jounals) (2018)pp.1-13
過去5年間の学会誌掲載論文
2018
- J.D.TANKS,M.KUBOUCHI,Y.ARAO;
“Influence of network structure on the degradation of poly(ether)amine-cured epoxy resins by inorganic acid”,
Polymer Degradation and Stability,Vol.157(Nov. 2018)pp.153-159
- Jonathon D. TANKS,Yoshihiko ARAO,Masatoshi KUBOUCHI;
“Diffusion kinetics, swelling, and degradation of corrosion-resistant C-glass/epoxy woven composites in harsh environments”,
Composite Structures,Vol.202(2018)pp.686-694
- Masahiro KUSANO, Tetsuya SAKAI, Yoshihiko ARAO, Masatoshi KUBOUCHI;
“Simultaneous sound velocity and thickness measurement by the ultrasonic pitch-catch method for corrosion-layer-forming polymeric materials”,
Ultrasonics,Vol.82(2018)pp.178-187
2017
2016
2015
- Asep Handaya SAPUTRA, Muhammad SHOHIBI and Masatoshi KUBOUCHI;
“Effect of Fly Ash Fortification in the Manufacture Process of Making Concrete towards Characterristics of Concrete in Sulfuric Acid Solution”,
Makara J. Technol.,Vol.19/3,[6] pp.133-140(2015)
- Masahiro KUSANO, Tetsuya SAKAI, Saiko AOKI, Masatoshi KUBOUCHI and Mikitoshi NAKADA;
“Degradation Analysis of the FRP Storage Tank for Sodium Hypochlorite and Comparison with the Immersion Test in Laboratory”,
Materials Science and Technology of Japan,Vol.52,[6] pp.220-224(2015)
- 草野正大,久保内昌敏,青木才子;“FRP製塩酸貯蔵タンクの劣化分析”,
強化プラスチックス,Vol.61,[8] pp.445-450(2015)
- Yoshihiko ARAO and Masatoshi KUBOUCHI;
“High-rate production of few-layer graphene by high-power probe sonication”,
Carbon,Vol.95,pp.802-808(December 2015)
- PRADCHAR Pradyawong, Saiko AOKI, Masatoshi KUBOUCHI and Tetsuya SAKAI;“The Effect of Cyclic Temperature of Sulfuric Acid on Flexural Property of Matrix Resin for FRP Storage”,
Journal of Chemical Engineering of Japan,Vol.48, [8]pp.670-677 (2015)
- 草野正大,酒井哲也,坂本有生,久保内昌敏;“エタノール環境における熱可塑性樹脂の劣化と超音波による非破壊評価”,
材料の科学と工学,Vol.52,[3] pp.99-103(2015)
2014
2013
- 久保内昌敏,徳田 隼,酒井哲也,青木才子,津田 健;“高温高濃度硫酸環境で用いる炭素繊維強化フェノールFRPの劣化挙動と寿命推定”,
材料システム,Vol.31,pp.37-42(2013)
2012
- Bryan PAJARITO,Masatoshi KUBOUCHI and Saiko AOKI;“Investigation of Water Diffusion in Triangular Bar-Reinforced Composites”,Advanced Composites Letters,
Vol.21,[6] pp.137-144(2012)
- Wiwat KEYOONWONG,Yi GUO, Masatoshi KUBOUCHI,Saiko AOKI and Tetsuya SAKAI;
“Corrosion behavior of three nanoclay dispersion methods of epoxy/organoclay
nanocomposites”,International Journal of Corrosion,Vol.2012,Article ID 924283, 10 pages (2012)
- Takehiro HAMAMURA,Masatoshi KUBOUCHI,Saiko AOKI,Tetsuya SAKAI,Osamu YOSHIDA
and Mitsuhiko EJIMA;“Corrosion behavior of glass-filled Co-polyacetalresin
in ozone environment caused by electric discharge”,
J. Material Life Society, Japan,Vol.24,[3] pp.95-101 (2012)
- Bryan PAJARITO,Masatoshi KUBOUCHI,Tetsuya SAKAI and Saiko AOKI;“Diffusion in Flake-Polymer Composites with Accelerated Interphase Transport”,
J. Soc. Mater. Sci. Jpn.,Vol.61,[10] pp.860-866 (2012)
- Chau Van Dinh and Masatoshi KUBOUCHI;“An Approach for the Prediction of Blistering on Polymer-Steel Lining Systems Exposed to an Aqueous Environment”,
Industrial & Engineering Chemistry Reserch, Vol.51,pp.11681-11687 (2012)
- Bryan PAJARITO,Masatoshi KUBOUCHI,Hiroyuki TOMITA and Saiko AOKI;“Microstructural
Dependency of Diffusion in Glass Flake-Reinforced Vinyl Ester Resins”,ASEAN J. Chem. Eng.,
Vol.12,[1] pp.11-19 (2012)
- 浜村武広,久保内昌敏,青木才子,吉田 治,江島光彦,酒井哲也;“ポリアミド樹脂の硝酸水溶液環境下における腐食挙動の速度論的な研究”,
材料,Vol.61,[6] pp.537-542(2012)
- Takehiro HAMAMURA,Masatoshi KUBOUCHI,Saiko AOKI,Tetsuya SAKAI,Osamu YOSHIDA and Mitsuhiko EJIMA;
“Corrosion Behavior of Co-polyacetal Resin under Nitric Acid Solutions”,
J. Japan Soc. Color Material,Vol.85,[4] pp.138-143(2012)
- 浜村武広,久保内昌敏,青木才子,吉田 治,江島光彦,酒井哲也;“ポリアセタール樹脂の硝酸水溶液環境下における腐食劣化の速度論的研究”,
材料と環境,Vol.61,[4] pp.182-187(2012)
- Phuong Ngoc Diem NGUYEN,Masatoshi KUBOUCHI,Tetsuya SAKAI,Susan A. ROCES,Florinda T. BACANI,Piyachat YIMSIRI,Raymond R. TAN;
“Relationship of Mechanical Properties and Temperature of Carbon Fiber Reinforced Plastics under Microwave Irradiation”,
Clean Technologies and Environmental Policy,on web, Vol.14, Issue 5, pp.943-951(Oct., 2012)
- Bryan PAJARITO,Masatoshi KUBOUCHI,Hiroyuki TOMITA and Tetsuya SAKAI;
“Absorption and Wet Retention of Flexural Properties of E-Glass Flake/Epoxy Composites under Corrosive Environment”,
Materials Science and Technology,Vol.49,[1] pp.32-38(2012)
2011
- 浜村武広,久保内昌敏,青木才子,吉田 治,江島光彦,酒井哲也;“放電で生成したオゾン曝露下におけるポリアセタールコポリマーの劣化特性に及ぼすオゾン濃度の影響”,
材料の科学と工学,Vol.48,[5] pp.258-263(2011)日本材料科学会論文賞受賞
- Terence P. TUMOLVA,Masatoshi KUBOUCHI,Saiko AOKI and Tetsuya SAKAI;
“Long Sugarcane and Abaca Fiber Reinforcements for Bagasse Green Composites: Alkali Treatment and Mechanical Properties”,
Materials Science and Technology (材料の科学と工学),Vol.48,[2] pp.87-94 (2011)
2010
- Yuong RATHANA,Susan A. ROCES,Florinda T. BACANI,Raymond R. TAN,Masatoshi KUBOUCHI and Piyachat YIMSIRI;
“Microwave-Enhanced Alkali Catalyzed Transesterification of Kenaf Seed Oil”,
International Journal of Chemical Reactor Engineering,on web,Vol.8,Note.S5 pp.1-8 (2010)
- 浜村武広,久保内昌敏,青木才子,柏村朋彦,吉田 治,江島光彦,酒井哲也;“ポリアセタールコポリマーの放電で生成したオゾン劣化特性に及ぼす湿度の影響”,
材料の科学と工学,Vol.47,[5] pp.244-251(2010)日本材料科学会論文賞受賞
- Phuong Ngoc Diem NGUYEN,Masatoshi KUBOUCHI,Tetsuya SAKAI,Susan A. ROCES,Florinda T. BACANI,Piyachat YIMSIRI;
“The Effects of Microwave Irradiation on the Degradation Processes of Unidirectional Carbon Fiber Reinforced Plastic (UD-CFRP)”,
Journal of the Materials Science Society of Japan,Vol.47,[1] pp.28-35 (2010)
- Terence P. TUMOLVA,Masatoshi KUBOUCHI,Saiko AOKI and Tetsuya SAKAI;
“Effect of Fiber Loading on the Mechanical Strength of NFR Hybrid Composites”,ASEAN J. on Chemical Eng.,Vol.10,[1] pp.22-27 (2010)
〜1990.4 1990.4〜1995.3 1995.4〜2000.3 2000.4〜2005.3 2005.4〜2010.3 2010.4〜2015.3
戻る