• TOP
• MEMBER
• RESEARCH
• PUBLICATION
• LECTURE
• GALLERY

Publications

• Fatemeh Bohlooli, Abdessadk Anagri, Shinsuke Mori,
  "Development of carbon-based metal free electrochemical sensor for hydrogen peroxide by surface modification of carbon nanowalls", Carbon, In Press (Available online 4 May 2022).
  DOI:10.1016/j.carbon.2022.05.002
  
• H. A. Nasef, Hamdy Hassan, Shinsuke Mori, S. A. Nada,
  "Experimental investigation on the performance of parallel and staggered arrays of PCM energy storage system for PV thermal regulation", Energy Conversion and Management 254, 115143 (2022).
  DOI:10.1016/j.enconman.2021.115143
  
• Leila Nasiry Khanlar, Ahmed Abdou, Tomohiro Takagaki, Shinsuke Mori, Masaomi Ikeda, Toru Nikaido, Amirali Zandinejad, Junji Tagami,
  "The effects of different silicatization and silanization protocols on the bond durability of resin cements to new high-translucent zirconia", Clinical Oral Investigations 26, 3547–3561 (2022).
  DOI:10.1007/s00784-021-04323-7
  
• Engy Ghoniem, Shinsuke Mori, Ahmed Abdel-Moniem,
  "An efficient strategy for transferring carbon nanowalls film to flexible substrate for supercapacitor application", Journal of Power Sources 493, 229684 (2021).
  DOI:10.1016/j.jpowsour.2021.229684
  
• Achraf Blout, Jerome Pulpytel, Shinsuke Mori, Farzaneh Arefi-Khonsari, Christophe Methivier, Alain Pailleret, Claude Jolivalt,
  " Carbon nanowalls functionalization for efficient O2 reduction catalyzed by laccase using design of experiment", Applied Surface Science 547, 149112 (2021).
  DOI:10.1016/j.apsusc.2021.149112
  
• Fatemeh Bohlooli, Ayumu Yamatogi, Shinsuke Mori,
  "Manganese oxides/carbon nanowall nanocomposite electrode as an efficient non-enzymatic electrochemical sensor for hydrogen peroxide", Sensing and Bio-Sensing Research 31, 100392 (2021).
  DOI:10.1016/j.sbsr.2020.100392
  
• Ryujiro Suzuki, Yuya Matsuoka, Daisuke Hirotani, Atsushi Nezu, Shinsuke Mori, Hiroshi Akatsuka,
  "Spectroscopic Measurement of Arc‐Discharge Argon Plasma Plume Injected into Water", IEEJ Transactions on Electrical and Electronic Engineering 16, 364-373 (2021).
  DOI:10.1002/tee.23305
  
• Shinsuke Mori, Yuki Takanami, Yuya Fujimoto, Shoma Sato,
  "Ammonia Synthesis by Pressure Swing of N2–H2 Nonthermal Plasma", Journal of Chemical Engineering Japan 53, 498-503 (2020).
  DOI:10.1252/jcej.19we208
  
• Radwan M. El-Zoheiry, Shinsuke Mori, Mahmoud Ahmed,
  "Using multi-path spiral flow fields to enhance under-rib mass transport in direct methanol fuel cells", International Journal of Hydrogen Energy 44, 30663-30681 (2019).
  
• Myat Kyaw, Shinsuke Mori, Nathaniel Dugos, Susan Roces, Arnel Beltran, Shunsuke Suzuki, "Plasma-Enhanced Chemical Vapor Deposition of Indene for Gas Separation Membrane",
  ASEAN Journal of Chemical Engineering 19, 47-53, (2019).
  
• Osama E. Gamea, Shinichi Ookawara, Shinsuke Mori, Mahmoud Ahmed,
  "Performance enhancement of direct methanol fuel cell using multi‐zone narrow flow fields", International Journal of Energy Research 43, 8257-8274, (2019).
  
• Francis Njoka, Shinsuke Mori, Shinichi Ookawara, Mahmoud Ahmed,
  "Effects of photo-generated gas bubbles on the performance of tandem photoelectrochemical reactors for hydrogen production", International Journal of Hydrogen Energy 44, 10286-10300 (2019).
  
• Shunsuke Suzuki, Shinsuke Mori,
  "The role of sulfur in promoted growth of carbon nanotubes in chemical vapor deposition proposed through the characterizations on catalytic nanoparticles", Applied Surface Science 471, 587-594 (2019).
  
• Shunsuke Suzuki, Shinsuke Mori,
  "Impacts of different sulfur sources as a promoter on the growth of carbon nanotubes in chemical vapor deposition" Chemical Physics Letters 709, 1-6 (2018).
• Shunsuke Suzuki, Shinsuke Mori,
  "Promoted growth of carbon nanotubes by sulfur addition in chemical vapor deposition shown via Arrhenius law" Diamond & Related Materials 89, 74-83 (2018).
• Ali Radwan, Shinichi Ookawara, Shinsuke Mori, Mahmoud Ahmed,
  "Uniform cooling for concentrator photovoltaic cells and electronic chips by forced convective boiling in 3D-printed monolithic double-layer microchannel heat sink" Energy Conversion and Management 166, 356-371 (2018).
• Shunsuke Suzuki, Shinsuke Mori,
  "Considerations on the key precursor for the growth of carbon nanotubes using a diesel engine as a reactor" Chemical Engineering Science 186, 62-73 (2018).
• Shunsuke Suzuki, Shinsuke Mori,
  "Synthesis of carbon nanotubes from biofuel as a carbon source through a diesel engine" Diamond and Related Materials 82, 79-86 (2018).
• Thu Hong Anh Ngo, Shinsuke Mori, Dung Thi Tran,
  "Photo-induced grafting of poly(ethylene glycol) onto polyamide thin film composite membranes", Journal of Applied Polymer Science, 134, 45454 (2017).
• Shunsuke Suzuki, Shinsuke Mori,
  "Flame Synthesis of Carbon Nanotube through a Diesel Engine Using Normal Dodecane/Ethanol Mixing Fuel as a Feedstock", Journal of Chemical Engineering of Japan 50, 178–185 (2017).
• Shunsuke Suzuki, Shinsuke Mori,
  "Carbon Nanotube-like Materials in the Exhaust from a Diesel Engine Using Gas Oil/Ethanol Mixing Fuel with Catalysts and Sulphur", Journal of the Air & Waste Management Association 67, 873-880 (2017).
• Shinsuke Mori, Lin Lin Tun,
  "Synergistic CO2 conversion by hybridization of dielectric barrierdischarge and solid oxide electrolyser cell", Plasma Process and Polymers 14, e1600153 (2017).
• Shinsuke Mori, Naoki Matsuura, Lin Lin Tun, Masaaki Suzuki,
  "Direct Synthesis of Carbon Nanotubes from Only CO2 by a Hybrid Reactor of Dielectric Barrier Discharge and Solid Oxide Electrolyser Cell", Plasma Chemistry and Plasma Processing 36, 231-239 (2016).
• Engy Ghoniem, Shinsuke Mori, Ahmed Abdel-Moniem,
  "Low-cost flexible supercapacitors based on laser reduced graphene oxide supported on polyethylene terephthalate substrate", Journal of Power Sources 324, 272-281 (2016).
• Thu Hong Anh Ngo, Dung The Nguyen, Khai Dinh Do, Thu Thi Minh Nguyen, Shinsuke Mori, Dung Thi Tran,
  "Surface modification of polyamide thin film composite membrane by coating of titanium dioxide nanoparticles", Journal of Science: Advanced Materials and Devices 1, 468-475 (2016).
• Alibi Baitukha, Shinsuke Mori, Masaaki Suzuki,
  "Liquid Crystal Alignment on Thin Organic Films Deposited in a Low Pressure Plasma Enhanced CVD Reactor", Plasma Process and Polymers 12, 450-455 (2015).
• Alibi Baitukha, Shinsuke Mori, Masaaki Suzuki,
  "Surface memory effect enhanced by atmospheric pressure plasma jet treatment for liquid crystal alignment", Thin Solid Films 566, 78-82 (2014).
• Sameh Hassan, Masaaki Suzuki, Shinsuke Mori and Ahmed Abd El-Moneim,
  "MnO2/carbon nanowall electrode for future energy storage application: effect of carbon nanowall growth period and MnO2 mass loading", RSC Advances 4, 20479-20488 (2014).
• S. Bhatt, J. Pulpytel, S. Mori, M. Mirshahi and F. Arefi-Khonsari,
  “Cell Repellent Coatings Developed by an Open Air Atmospheric Pressure Non-Equilibrium Argon Plasma Jet for Biomedical Applications”, Plasma Processes and Polymers 11, pp. 24–36 (2014).
• Sameh Hassan, Masaaki Suzuki, Shinsuke Mori, Ahmed Abd El-Moneim,
  “MnO2/carbon nanowalls composite electrode for supercapacitor application”, Journal of Power Sources 249 pp. 21-27 (2014).
• Wilson Smith, Houssam Fakhouri, Jerome Pulpytel, Shinsuke Mori, Rossana Grilli, Mark A. Baker, Farzaneh Arefi-Khonsari,
  “Visible Light Water Splitting via Oxidized TiN Thin Films”, J. Phys. Chem. C, 116, pp. 15855-15866 (2012).
• Alibi Baitukha, Shinsuke Mori, Masaaki Suzuki,
  “Modification of a-C:H film surface by atmospheric pressure plasma jet for liquid crystal alignment”, Thin Solid Films, 523, pp. 37-40 (2012).
• Yukitaka Kato, Toru Obara, Ichiro Yamanaka, Shinsuke Mori, Arnoldus Lambertus Dipu, Junichi Ryu, Yutaka Ujisawa, Masaaki Suzuki,
  “Performance analysis of active carbon recycling energy system”, Progress in Nuclear Energy, 53, pp. 1017-1021 (2011).
• Shinsuke Mori, Takanori Ueno, Masaaki Suzuki,
  “Synthesis of carbon nanowalls by plasma-enhanced chemical vapor deposition in a CO/H2 microwave discharge system”, Diamond and Related Materials 20, 1129-1132 (2011).
• Nga Thi Anh Nguyen, Masashi Ichikawa, Shinsuke Mori, Masaaki Suzuki,
  “Nitrogen Isotope Separation by Plasma Chemical Reaction in N2-O2 DC Glow Discharge”, Journal of Chemical Engineering of Japan,44[8], pp. 572-576 (2011).
• 田川 祐樹, 森 伸介, 鈴木 正昭, 山中 一郎, 小原 徹, 劉 醇一, 加藤 之貴,
  “誘電体バリア放電反応器と固体酸化物形電気分解セルのハイブリッド化による相乗的CO2分解”, 化学工学論文集, 37[2], pp. 114-119 (2011).
• Thu Hoai Nguyen, Shinsuke Mori, Masaaki Suzuki,
  “Hydrogen Separation from Products of Methane Reforming Reaction Carried Out in a Plasma Membrane Reactor at Low Temperature and Atmospheric Pressure”, Journal of Chemical Engineering of Japan,43[1], pp. 76-81 (2010).
• Thu Hoai Nguyen, Shinsuke Mori, Masaaki Suzuki,
  “Hydrogen Permeance and the Effect of H2O and CO on Permeability of Pd0.75Ag0.25 Membranes under Gas-Driven Permeation and Plasma-Driven Permeation”, Chemical Engineering Journal, 155[1-2], pp. 55-61 (2009).
• Shinsuke Mori, Masaaki Suzuki,
  “The Role of C2 in Low Temperature Growth of Carbon Nanofibers”, Journal of Chemical Engineering of Japan, 42, pp. s249-s254 (2009).
• Yoon-Keun Chae, S. Mori, M. Suzuki,
  “Partial Reduction of TiO2 without Form Transformation Using Non-Thermal Plasma”, Thin Solid Films, 517, pp. 4260-4263 (2009).
• S. Mori, M. Suzuki,
  “Catalyst-Free Low-Temperature Growth of Carbon Nanofibers by Microwave Plasma-Enhanced CVD”, Thin Solid Films, 517, pp. 4264-4267 (2009).
• S. Mori, M. Suzuki,
  “Characterization of carbon nanofibers synthesized by microwave plasma-enhanced CVD at low-temperature in a CO/Ar/O2 system”, Diamond and Related Materials 18, 678-681 (2009).
• Dung Thi Tran, Shinsuke Mori, Daisuke Tsuboi, Masaaki Suzuki,
  “Plasma polymerization Formation of Plasma-Polymerized Top Layers on Composite Membranes: Influence on Separation Efficiency”, Plasma Processes and Polymers, 6[2], pp. 110-118 (2009).
• S. Mori, M. Suzuki,
  “Non-Catalytic Low-Temperature Synthesis of Carbon Nanofibers by Plasma-Enhanced Chemical Vapor Deposition in a CO/Ar/O2 DC Discharge System”, Applied Physics Express 2, 015003 (2009).
• Dung Thi Tran, Shinsuke Mori, Masaaki Suzuki,
  “Characteristics of polyimide-based composite membranes fabricated by low-temperature plasma polymerization”, Thin Solid Films, 516[13], pp. 4384-4390 (2008).
• S. Mori, M. Suzuki,
  “Effect of Oxygen Addition on the Low Temperature Synthesis of Carbon Nanofibers Using Low-Temperature CO Plasma”, Diamond and Related Materials 17, 999-1002 (2008).
• Yoon-Keun Chae, S. Mori, M. Suzuki,
  “Partial Reduction of TiO2 without Form Transformation Using Non-Thermal Plasma”, Transactions of the Materials Research Society of Japan, 32[2], 527-530 (2007).
• Tran Thi Dung, S. Mori, M. Suzuki,
  “Plasma Modification of Polyacrylonitrile Ultrafiltration Membrane”, Thin Solid Films, 515[9], pp. 4148-4152 (2007).
• M. Kadowaki, A. Yamamoto, S. Mori, M. Suzuki,
  “Modeling of Plasma CVD on the Inner Surface of a Micro Channel”, Thin Solid Films, 515[9], pp. 4197-4202 (2007).
• A. Yamamoto, S. Mori, M. Suzuki,
  “Scale-Up or Numbering-Up of a Micro Plasma Reactor for the Carbon Dioxide Decomposition”, Thin Solid Films, 515[9], pp. 4296-4300 (2007).
• S. Mori, M. Fukuya, M. Suzuki,
  “Synthesis of Carbon Nanofibers Using Carbon Monoxide DC Plasma at Room Temperature”, Transactions of the Materials Research Society of Japan, 32[2], 513-516 (2007).
• M.Kadowaki, H. Yoshizawa, S. Mori, M. Suzuki,
  “Plasma CVD on inner surface of microchannel”, Thin Solid Films 506-507, pp. 123-127 (2006).
• S. Mori, A. Yamamoto, M. Suzuki,
  “Characterization of a capillary plasma reactor for carbon dioxide decomposition”, Plasma Sources Science and Technology, 15, 609-613 (2006).
• S. Mori, M. Sakurai, M. Suzuki,
  “Recovery of Carbon-14 from Graphite Moderator of Dismantled Gas-Cooled Reactor by Plasma Chemical Reactions in Carbon Monoxide Glow Discharge”, Journal of Nuclear Science and Technology, 43[4], 432-436 (2006).
• M. Suzuki, M. Kadowaki, F.H. Windarto, S. Mori,
  “Comparison of Different Types of Plasma in Radioactive Surface Decomtamination Process”, Materials Science Forum, 502, pp. 321-326 (2005).
• S. Mori, H. Akatsuka, M. Suzuki,
  “Numerical analysis of carbon isotope separation by plasma chemical reactions in carbon monoxide glow discharge”, Journal of Nuclear Science and Technology, 39[6], pp. 637-646 (2002).
• S. Mori, H. Akatsuka, M. Suzuki,
  “Carbon and oxygen isotope separation by plasma chemical reactions in carbon monoxide glow discharge”, Journal of Nuclear Science and Technology, 38[10], pp. 850-858 (2001).